Main frame with TIG welding completed.
Viewed: 2092 times.
|
To get adequate clearance for a 2" tire a 73mm BB was used. The chain stays were dimpled on the inside and both chain and seat stays were curved.
Viewed: 2004 times.
|
Closeup of head tube that shows off the shaped top tube and down tube.
Viewed: 1946 times.
|
Closeup of seat tube showing the lines of the shaped top tube and seat stays.
Viewed: 2014 times.
|
Closeup of bottom bracket.
Viewed: 2030 times.
|
Closeup of custom CNCed rear dropouts.
Viewed: 2112 times.
|
Rear dropout after CNC before final filing.
Viewed: 2030 times.
|
Closeup of other side of the dropout.
Viewed: 2341 times.
|
